Table of Contents
Advertisement
Problem
The camera cannot focus.
Images are blurred.
Streaks of light or partial
discoloration are visible in
the monitor.
F10
Cause/Solution
• The subject is too close. Try shooting using
macro mode or x (scene auto selector) mode,
or Close-up scene mode.
• The subject is hard to focus on.
• Set AF assist in the setup menu to Auto.
• Turn the camera off and then on again.
• Use the flash.
• Increase the ISO sensitivity value.
• Enable Photo VR and/or Motion detection
when shooting still images. Enable Movie VR
when recording movies.
• Use BSS (Best Shot Selector).
• Use a tripod to stabilize the camera when
shooting (using the self-timer at the same time
is more effective).
Smear may occur when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such as
the sun, reflections of the sun, and electric lights is
recommended.
A
32, 35, 49
61
74, E67
20
45
54, E35
70, 73,
E58,
E65,
E66
35, E33
47
68, E34,
F3
Hide quick links:
Advertisement
Table of Contents
