Toshiba A5 User Manual page 155

Problem
Character display
becomes garbled
during a communication
You cannot receive an
incoming call
LAN
Problem
Cannot access LAN or
the Wake up on LAN
feature does not work
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access Wireless
LAN
TOSHIBA A5
Procedure
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
Check the "rings before auto answer" setting in
your communications application.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN hub.
Make sure the AC adapter is connected. You
cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
Use the Config Free program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN
administrator.
Troubleshooting
9-16