NAD C565BEE Owner's Manual page 8

IDENTIFICATION OF CONTROLS
FRONT PANEL
7 RANDOM: This button when pressed will engage or disengage
random playback mode. When engaged (a corresponding "RANDOM"
icon is illuminated in the VFD), random playback of tracks or files will
begin by pressing [PLAY/PAUSE/SKIP] from STOP mode or rotating
[PLAY/PAUSE/SKIP] during playback mode. Press [RANDOM] again to
return to normal playback ("RANDOM" icon in the VFD is extinguished).
Random playback mode can also be disengaged by pressing [STOP/
OPEN] button.
The Random playback mode can be used in combination with the
Repeat Play All mode but not with Program playback mode.
8 REPEAT: A particular track or file can be repeatedly played back by
pressing this button. Toggle this button to repeat a track/file, folder, all
tracks or all files. Corresponding icons like REPEAT, REPEAT FOLDER, or
REPEAT ALL will be illuminated in the VFD as the particular repeat mode
is selected. Turn off repeat mode by pressing the REPEAT button until
the REPEAT icon is extinguished in the VFD.
9 DISPLAY: Toggle to display the following disc information during
playback
INFORMATION
Elapsed time of the current track
Remaining time of the current track
Total playback time of the disc
Remaining time of the disc
Song title
Artist name
Album name
File name
Elapsed time of the current file
File number of the current file with
respect to the total number of files
under the current folder
NOTES
• Some information may not be displayed on some discs. Display is
dependent on the disc's information content.
• If the file has no available information about the song title, artist or
album, the display will show "NO TITLE", "NO ARTIST" or "NO ALBUM".
8
AUDIO CD CD TEXT MP3/WMA
 
-
 
-
 
-
 
-
 
-
 
-
 
-

- -

- -

- -
10 SCAN [ ]: Press and hold [
to search up or down a track/file. The SCAN [
optical pickup to scan backwards through the recording at high speed.
The SCAN [ ] button causes the optical pickup to scan rapidly
forward through the music.
11 USB INPUT: Connect a USB device into this input.
12 PLAY/PAUSE/SKIP: This control knob has three functions – PLAY,
PAUSE and SKIP [ ].
PLAY/PAUSE: Press this knob to toggle between Play and Pause of
a CD or other compatible media disc. Press to start play or resume
play after Pause. The icon " " is illuminated in the VFD indicating the
C 565BEE is in playback mode. If the disc tray is open, press this button
to automatically close the tray and start playback if a disc is loaded.
During playback, press this button to stop playback temporarily,
keeping the optical pickup at its current position on the disc. The
icon " " is illuminated in the VFD indicating the C 565BEE is in pause
mode. To resume playback at the exact point where it stopped, press
[PLAY/PAUSE/SKIP] again.
SKIP [ ]: Rotate this knob clockwise to SKIP forward a track/
file. Rotate it counterclockwise to SKIP backward to the beginning of the
current track/file or previous track/file.
13 VFD: The Vacuum Fluorescent Display (VFD) provides playback
information, settings and other indicators.
14 REMOTE SENSOR: Point the CD 9 at the remote sensor and press the
buttons. Do not expose the remote sensor of the CD 9 to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate the C 565BEE with the remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.
] for more than 2 seconds
] button causes the