Programme Chart - Hotpoint BCI450 Instructions For Installation And Use Manual

D

Programme Chart

Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
Very dirty dishes and pans
(not to be used for
delicate items)
Cycle for normally dirty
pans and dishes. Standard
daily cycle.
Environmentally-friendly
cycle, with low energy
consumption levels,
suitable for normally dirty
pans and dishes.
Economic and fast cycle to
be used for slightly dirty
dishes. Run cycle
immediately after use.
Preliminary wash cycle for
dishes while awaiting
completion of the load
with the dishes from the
next meal.
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill
your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
8
Pre-wash with hot water at 40°C
Extended wash at 65°C.
2 Rinses with cold water
Rinse with hot water at 65°C.
Drying.
Extended wash at 60°C.
Cold Rinse
Rinse with hot water at 70°C.
Drying.
2 Cold pre-washes
Extended wash at 50°C
Hot rinse at 65°C
Drying
Short wash at 47°C
Hot rinse at 65°C
Drying
Short cold wash to prevent food
from drying onto the dishes