Viewing Burst Images - Sony Cyber-shot DSC-WX5 Instruction Manual

Viewing burst images

Plays back burst images.
1 Press the
(Playback) button to switch to playback mode.
2 Select burst images using b/B on the control button.
3 Press the desired button according to the playback
mode.
Operation method
Press V on the control button.
Press z on the control button.
Note
• You can view the burst images as a movie only when you set [View Mode] to [Date View] and [Display
Burst Group] to [Display Main Image Only].
z Displaying grouped burst images side by side
Only the main image is displayed if [Display Main Image Only] has been set. You can
display images in the index by following the procedure below.
Main image
Display the main image in playback mode, then press V on the control button.
1
The images are displayed in the index.
Press b/B to display each image in a burst group.
2
The display switches between single image display and thumbnail image display each time you
3
press z.
To cancel the display, press V.
4
Action
Displays the burst images in index mode.
The display switches between single image display and thumbnail
image display each time you press z on the control button.
You can view the burst images as a movie by tilting the camera to
the right or left.
Thumbnail image
display
The image being displayed
above
Single image display
Continued r
47 GB