Completing The Installation - D-Link DUB-E100 User Manual

Section 2 - Installation
When the installation of the DUB-E100 is complete, the Speed LED will illuminate solid green when the DUB-E100 is connected
to a 100 Mbps network and remains off when connected to a 10 Mbps network. The Tx/Rx LED will flash amber when data is
being transmitted or received. If both LEDs are unlit, there may be a problem with the physical connection. Check the cables
between your DUB-E100 and your switch or router. Verify that your network switch or router is powered on.
Speed LED
Lights solid green when the network
connection is at 100 Mbps and remains off
when connected to a 10 Mbps network.
D-Link DUB-E100 User Manual

Completing the Installation

TX/RX LED
Flashes amber when data is
being transmitted or received.
15