HP dc7800 series Hardware Reference Manual page 18

8. Press the two release tabs on the inside of the bezel towards the right side of the computer (1) and
rotate the bezel off from right to left (2).
Figure 2-3
9. Replace the fan shroud.
To replace the front bezel:
1. Slide the hooks on the left side of the bezel into the slots on the chassis (1) then press the right
side of the bezel onto the chassis so that the latches snap in place (2).
Figure 2-4
2. Replace the access panel.
3. If the computer was on a stand, replace the stand.
4. Reconnect the power cord and turn on the computer.
5. Lock any security devices that were disengaged when the access panel was removed.
12 Chapter 2 Hardware Upgrades
Removing the Front Bezel
Replacing the Front Bezel
ENWW