LG 32LV3700-ZA Owner's Manual page 99

Setting
Real Cinema or Film Makes video clips recorded in film look more natural by eliminating judder effect.
Mode Uses this function when you watch film-originated movie contents.
This function can also work when TruMotion is off.
Colour Gamut LED LCD TV / LCD
TV
Plasma TV
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC This feature is not available for all models.
This is produces richer colours.
This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Expert Pattern This is the pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature Adjusts the overall colour of the screen by changing the white baseline.
LED LCD TV / LCD
TV
Plasma TV
Colour Management As the tool used by the experts to make adjustments by using the test patterns, this does not
System affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
»
y
»
y
This feature is disabled in RGB-PC and HDMI-PC mode.
Advanced Control
»
y
»
y
»
y
Expert Control
Displays colour domain of the signal.
»
y
»
y
»
y
»
y
»
y
Advanced Control, Expert Control
»
y
»
y
»
y
Photo mode
»
y
»
y
a. Method : 2 Points
Pattern: Inner, Outer
y y
Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjust-
y y
ment range is -50 to +50.
b. Method : 10 Point IRE
Pattern: Inner, Outer
y y
IRE (Institute of Radio Engineers) is the unit to display the size of
y y
the video signal and can be set among 10, 20, 30 to 100. You can
adjust Red, Green or Blue according to each setting.
Luminance: This function displays calculated luminance value for
y y
2.2 gamma. You can input luminance value you want at 100 IRE,
than the target luminance value for 2.2 gamma is displayed at
every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 to +50.
y y
c. Apply to all inputs
a. Method : 2 Points
Pattern: Inner, Outer
y y
Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjust-
y y
ment range is -50 to +50.
b. Method : 20 Point IRE
Pattern: Inner, Outer
y y
IRE (Institute of Radio Engineers) is the unit to display the size of
y y
the video signal and can be set among 5, 10, 15 to 100. You can
adjust Red, Green or Blue according to each setting.
Red/Green/Blue: The adjustment range is -50 to +50.
y y
c. Apply to all inputs
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 to +30.
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 to +30.
Description
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
EBU: Mode to display EBU standard colour area.
SMPTE: Mode to display SMPTE standard colour area.
BT709: Mode to display BT709 standard colour area.
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Wide: Increase number of colours used.
sRGB: Mode to display sRGB standard colour gamut.
CUSTOMIZING SETTINGS
99