Connection And Installation Procedures; Software Installation - Belkin Dual Video Docking Stand User Manual

CONNECTION AND INSTALLATION PROCEDURES

Connection and
Installation Procedures

Software Installation

For Windows 8/Windows 7 Users
1. Connect power to the Docking Stand.
2. Connect power to your ultrabook or MacBook.
3. Plug the Docking Stand into the laptop with the provided USB 3.0
upstream cable. Installation should start automatically. If it does not start
automatically, unplug the laptop from the Docking Stand and go to this
Web address to download and install the drivers:
www.displaylink.com/support/downloads
4. Follow the on-screen instructions to install the drivers.
5. Note: Be patient during the installation process and do not turn off your
computer. The installation process may take several minutes to complete.
6. Once the software is installed, plug in all the monitors and other
peripherals you want to use and wait for the Windows prompt that "Your
device is ready to use."
7. Proceed to the Docking Stand Installation and Configuration section of
this User Manual.
For Windows Vista/Windows XP Users
1. Connect power to the Docking Stand.
2. Connect power to your ultrabook or MacBook.
3. Before plugging the laptop into the Docking Stand, go online to download
the latest drivers:
www.displaylink.com/support/downloads
4. After downloading the latest drivers, click on the "setup.exe" file to start
the installation. If an administrator password is required, enter your
administrator credentials.
5. Click on "I Accept" to accept the End User License Agreement.
USB 3.0 Dual Video Docking Stand for Ultrabooks and MacBook® Computers
SECTIONS
1 2 3 4 4 5
6. Note: Be patient during the installation process and do not turn off your
computer. The installation process may take several minutes to complete.
7. Once the software is installed, plug the Docking Stand into the laptop
with the provided USB 3.0 upstream cable. Installation should start
automatically.
8. Once the software is installed, plug in all the monitors and other
peripherals you want to use and wait for the Windows prompt that "Your
device is ready to use."
9. Proceed to the Docking Stand Installation and Configuration section of
this User Manual.
For Mac OS X (or greater):
1. Connect power to the Dual Video Docking Stand.
2. Connect power to your MacBook.
3. Plug the Docking Stand into the laptop with the provided USB 3.0
upstream cable, and navigate to Display Link's website for the latest Mac®
drivers.
http://www.displaylink.com/support/mac_downloads.php
4. Follow the on-screen instructions to install the drivers.
5. Note: Be patient during the installation process and do not turn off your
computer. The installation process may take several minutes to complete.
6. Restart your computer per the installation prompt.
7. Once the software is installed, and your computer has restarted, plug in all
the monitors and other peripherals you want to use.
8. Proceed to the "Docking Stand Installation and Configuration" section of
this User Manual.
5
6 7