Lenovo ThinkCentre M32 User Manual page 38

4. Remove the screw that secures the plastic retainer. Then, remove the plastic retainer as shown.
Figure 13. Removing the plastic retainer that secures the DOM card
5. Gently pull the old DOM card out of the DOM card slot.
Notes:
• The DOM card fits tightly in the DOM card slot. If necessary, alternatively move each side of the DOM
card a small amount until it is removed from the DOM card slot.
• Do not touch the contact edge and circuit board of the DOM card.
Figure 14. Removing the DOM card
6. Touch the static-protective package that contains the new DOM card to any unpainted surface on the
outside of the computer. Then, take the new DOM card out of the package.
28
ThinkCentre M32 User Guide