Security Setting; Justw00T!(Overclock) Setting; Power Setting - XFX GeForce 8300 (MI-A78U-8309) User Manual

XFX Motherboard Series
4.5.5 Security Settings
Main Advanced
Security Settings
Supervisor Password :Not Installed
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
Flash Write Protection
This item allows you to Chage Supervisor/User Password, Type the password, up to
eight characters, and press <Enter>. The password typed now will clear any previously
entered password from CMOS memory. You will be asked toconfi rm the password. Type the
password again and press <Enter>.
Note: Don't forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.
You may also press <Esc> to abort the selection.

4.5.6 Power Setting

Main Advanced
POWER Settings
► ACPI Con guration
► APM Con guration
► PC Health
BIOS SETUP UTILITY
Security
Boot
:Not Installed
[Disabled]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Security
Boot
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Power JUSTw00t!
Install or Change the
password.
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Power
JUSTw00t!
Con gure/monitor
the Hardware Health
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
- 22 -
User Guide
Exit
Select Screen
Select Item
Exit
Select Screen
Select Item