Lenovo B50-30 Touch Hardware Maintenance Manual page 62

Lenovo B50-30/B50-30 Touch/B50-45/ B50-70
Hardware Maintenance Manual
For Windows 8 operating System:
58
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover, and put
on the new base cover.
Palm Rest Label
ES label
VGA label
CPU label
Rating label
Rating print label
WLAN & BT Label
Indonesia rating label
GML Label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
B50‐30/B50‐30 Touch/B50‐45/B50‐70:
a
Notes:
No WLAN & BT Label (g) case, align the Indonesia rating label (h) to the
WLAN&BT label (g).
1
b
c
d
2
e
f
g
h
i