Sport; Stopwatch; Recording Laps - SanDisk Clip Sport User Manual

Chapter 8
This chapter describes how to use the SanDisk Clip Sport MP3
player's sport mode.

Sport

The SanDisk Clip Sport MP3 player has a built-in timer function that records time in hours,
minutes, seconds, and hundredths of a second. The timer function also allows you to record
and save Laps.

Stopwatch

To start stop watch, follow these steps:
1. Select Sport from the Main Menu.
2. Select Stopwatch.
3. To start timer, press the Play button once. To Pause stopwatch, press the Play
button once.
Quick Tips: After time is started and stopped, time can be resumed by either pressing Play
button again, or by pressing the Back button to access the Timer Menu where Resume will
be highlighted. Resume will remain an option until a new timer is created.

Recording Laps

To record laps, follow these steps:
1. After starting the timer, press the Select button to record a Lap.
Quick Tips: A Lap will save and record time between Laps. Lap 1 will save and record time
from the beginning, then Lap 2 will save and record the amount of time that has lapsed
between the previous Lap and the current time. Therefore, Laps will add up to the total time
if it is utilized during live timing by the user.
2. After desired laps are recorded, press the Back button and select Current Log to
view the logs. The current log information is automatically saved when a new log is
created by pressing Stopwatch. To view recorded log information, press Saved Logs.
(This option shows the date logs were recoded, start time of the logs, total time
calculated from adding all of the logs together, average time from the logs calculated,
and all the laps recorded during that logged amount of time.)
Quick Tips: A Log is the set of laps that are recorded and stored in one session.
Settings
27