Sound Features; Volume Control; X-Bass; Muting Audio - RCA RS2300 User Manual

Sound Features

Volume Control

Turn VOLUME on the main unit or press VOL
on the remote control to adjust volume level.

X-Bass

Press X-BASS to turn on/off boosting the bass
frequency.

Muting Audio

Press MUTE on the remote to cut the sound.
(Remote Only)

CD Player

CD-R / RW

Notes on CD-R/RW Disc:

• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
Note: Be sure to remove all discs from the disc
compartment before moving or transporting the
unit!
This unit is compatible with
CD-RW/ CD-R discs for play-
back.

Using Preset Equalizer Curves

or Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows the selection
briefly.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press SKIP
BACKWARD
main unit or
FORWARD
among displayed bass- and treble - range levels.
3. While BAS or TRE is displayed, adjust VOLUME
to set the associated gain between -10 - +10.

Loading Discs

1. Press SOURCE repeatedly on the main unit or CD
on the remote control to select CD mode.
2. Press DISC OPEN/CLOSE
the main unit or OPEN/CLOSE on the remote
control to open disc compartment.
3. Insert up to 5 discs with label face up.
4. Press DISC OPEN/CLOSE
the main unit or OPEN/CLOSE on the remote
control again to close disc compartment.
that is loaded and ready to play is the icon that is
flashing on the display.

Play and Pause Discs

• Press PLAY/PAUSE
playback.
• Press PLAY/PAUSE
pause disc.Press again to resume.
Play and load simultaneously by:
1. Press DISC OPEN/CLOSE
the main unit or OPEN/CLOSE on the remote
control to open the tray while a CD is playing.
2. Load/change discs for available trays.
3. Press DISC OPEN/CLOSE
of the main unit or OPEN/CLOSE on the remote
control to close the tray.
or SKIP FORWARD
SKIP BACKWARD or SKIP
on the remote control to cycle
on the front panel of
on the front panel of
in stop mode to begin
during playback to to
on the front panel of
on the front panel
EN
on the
The disc
7