Boot Screen - ASROCK FM2A58M-HD+ User Manual

4.7 Boot Screen

In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Fast Boot
Fast Boot minimizes your computer's boot time. There are three con-
figuration options: [Disabled], [Fast] and [Ultra Fast]. The default value is
[Disabled]. Please refer to below descriptions for the details of these three
options:
[Disabled] - Disable Fast Boot.
[Fast] - The only restriction is you may not boot by using an USB flash
drive.
[Ultra Fast] - There are a few restrictions.
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
Setup Prompt Timeout
This shows the number of seconds to wait for setup activation key.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
54
1. Only supports Windows
2. You will not be able to enter BIOS Setup (Clear CMOS or run utility
®
in Widows to enter BIOS Setup).
3. If you are using an external graphics card, the VBIOS must support
UEFI GOP in order to boot.
®
8 UEFI operating system.