Index Number Request; Dvd Disc Status Request - Pioneer BDP-V6000 Command Protocol Manual

 Execution examples
Command
?T<CR>

3.7.26. Index Number Request

 Command mnemonics ： ?I
 Description of function
When the ?I command is received, the currently playing address data from the table below is returned.
If the value cannot be acquired, error (E04) is returned.
The following shows the application information and address information.
Application information
CD-DA/DTS-CD
 Execution examples
Command
?I<CR>

3.7.27. DVD Disc Status Request

 Command mnemonics ； ?V
 Description of function
When the ?V command is received, the DVD's status is returned.
If the ?V command is received when the disc physical data is BD/CD, error (E04) is returned.
○ Disc physical information (DVD) (C1)
When the disc physical information is DVD, "Yes (1)" is returned.
When the disc physical information is no disc, "No (0)" is returned.
"Unknown (X)" is returned while the disc physical data is being acquired.
○ Chapter search (C4)/time search (C5)
During playback when the application information is DVD-Video/DVD VR, whether or not
chapter searching/time searching is possible is returned.
"Unknown (X)" is returned if the information cannot be acquired or if the application information
is something other than DVD-Video/DVD VR.
Status BD player operation
During playback
11742<CR> (117 minutes 42 seconds)
Address information
Track no. (2 digits) and index no. (2 digits)
Index: Number with track start position as 0.
Status BD player operation
During CD-DA playback
0102<CR> (Track 1, index 2)
Page 31 of 39