Fog Lamps; Front Turn Signal Lamps - Chevrolet Tahoe 2015 Owner's Manual

10-32 Vehicle Care

Fog Lamps

To replace the front fog lamp bulb:
1. Locate the fog lamp under the
front bumper.
2. Disconnect the electrical
connector from the fog lamp bulb
assembly by pressing the
connector release.
3. Remove the bulb from the
housing by squeezing the two
release tabs and pulling it
straight out of the assembly.
4. Install the new bulb by pushing it
in until it clicks into place, or turn
the bulb clockwise to secure.
5. Reconnect the electrical
connector.

Front Turn Signal Lamps

1. Open the hood. See Hood on
page 10-4
2. Reach in and access the bulb
socket from inside the engine
compartment.
3. Turn the bulb socket
counterclockwise to remove it
from the headlamp assembly
and pull it straight out.
4. Remove the bulb by pulling it
straight out of the socket bulb
socket.
5. Replace it with a new bulb.
6. Reinstall the new bulb socket
into the headlamp assembly and
turn it clockwise to secure.