Chevrolet Tahoe 2015 Owner's Manual page 296

(On/Off): Press to turn the
system on or off. A white indicator
comes on in the instrument cluster.
SET (Set/Coast): Press briefly to
set the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle
speed.
+RES (Resume/Accelerate): If
there is a set speed in memory
press to resume that speed or press
and hold to accelerate. If cruise
control is already active, use to
increase vehicle speed.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If is on when not in use, the SET
or +RES control could get pressed
and go into cruise when not desired.
Keep the cruise button off when
cruise is not being used.
The cruise control light on the
instrument cluster will come on
green after the cruise control has
been set to the desired speed.
1. Press to turn the cruise
system on.
2. Get up to the desired speed.
3. Press and release the SET
button on the steering wheel.
The desired set speed briefly
appears in the instrument panel
cluster.
4. Remove foot from the
accelerator.
Driving and Operating
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster on page 5-11.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches
about 40 km/h (25 mph) or more,
briefly press the +RES button on the
steering wheel. The vehicle returns
to the previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold the +RES button
on the steering wheel until the
vehicle accelerates to the
desired speed, then release it.
9-49