Advertisement
Viewing Photos from a TV
1. Connect the supplied TV cable's black plug
5 — TV cable jack
to the 5 jack at the left side of the digital
photo viewer, and yellow plug at the cable's
other end to the TV's video input jack. The
digital photo viewer's display becomes
blank.
2. Set your TV's input to video.
3. Press < or > to view a single photo, or 4 to
view the slide show.
6 — USB jack
Connecting to Your PC
Windows ME/2000/XP
Notes:
•
The USB cable fits only one way. If it does not fit, do not force it. Turn it over and try again.
•
Refer to your computer's owner's manual for the location of the USB port.
1. Start Windows ME, 2000, or XP, and quit all applications.
2. Insert a CF or SD/MMC memory card into its slot.
3. Connect the USB cable's small plug to the digital photo
viewer 's display becomes blank, and the computer installs automatically.
Windows 98SE
1. Start Windows 98SE, and quit all applications.
2. Insert the supplied CD into your CD-ROM driver.
3. Connect the USB A-B cable's small plug to the digital photo
"Add New Hardware Wizard" screen displays. Click "Next".
4. Windows is preset to search for the best driver for your digital photo viewer . Click "Next".
5. Check "CD-ROM drive" from the screen, and then click "Next".
6. Windows is searching and installing E:\UMSS>INF driver for the digital photo viewer . Click "Next".
7. When Windows completes the installation, click "Finish" .
Transferring Files
The digital photo viewer also can work as a card reader/writer to let you transfer any format of files from the memory card to your
computer, and vice versa. For example, if you need to free some memory for taking other photos, you can transfer the photo's files
from the memory card to your PC for backup. Any time you need them, move back the photo's files from PC to the memory card.
1. Open "Windows Explorer". Then double-click "My Computer" and "E: Removable Disk" until the "DCIM" folder appears.
2. Double-click "DCIM". Its sub-folder like "100MEDIA" or "1xxxxxx" appears. Then double-click that sub-folder. All files stored in
your memory card appear.
Note: The sub-folder is named by the camera you use. It usually shows as 100MEDIA, 100xxxx, or 200xxxx,...etc.
To transfer files from your PC to the memory card, drag and drop files from your computer to the designated directory :\DCIM\sub-
folder.
To transfer files from the memory card to PC, drag and drop files from the designated directory :\DCIM\sub-folder to your PC's any
folder.
. — AC
adapter jack
6 jack, and large plug to the computer's USB port. The photo
viewer 's
6 jack, and large plug to the computer's USB port. The
viewer 's
FAQs
Why doesn't the digital photo viewer power on?
Check the AC adapter. Be sure the adapter is connected securely and correctly.
Check that the AC outlet is working properly.
Why doesn't the digital photo viewer display my photos?
Be sure the image file is captured by a digital camera and saved in the proper file
format.
Be sure the image files are located at the directory :\DCIM\sub-folder.
Check if the image file is downloaded from the website or modified by other
programs. If yes, open the file from the MS Paint software, and re-save it in the
xxxxaaaa.jpg format.
Why does the image appear scrambled?
Original photo
Photo scrambled by display
The photo resolution is higher than 6 mega (3072 x 2048) pixels. You need to
reduce the photo's resolution. Open the file from the MS Paint. Click "Image" and
"Stretch/Skew". Under STRETCH reduce the photo's horizontal and vertical size
by the same percentage, which changes its resolution. Check under "Image" and
"Attributes" to verify the photo has changed to one of the following resolutions,
and then save it as xxxxaaaa.jpg format.
Suggested resolutions
2304 x 1728 pixels (4 mega pixels),
2048 x 1536 pixels (3 mega pixels),
1600 x 1200 pixels (2 mega pixels),
1280 x 960 pixels (1 mega pixels)
640 x 480 pixels (300k pixels)
Why doesn't the digital photo viewer work properly?
The viewer may need to be reset. To reset the viewer, unplug the AC
adapter, and then reconnect it.
Limited One Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and
authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS
PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts
and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance,
alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic
damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 12/99
©2004 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
FCC Information
Your digital photo frame is ETL listed to UL standards and
meets all applicable FCC requirements.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult your local RadioShack store or an experienced
radio/TV technician for help.
• If you cannot eliminate the interference, the FCC requires
that you stop using your frame.
Changes or modifications not expressly approved by
RadioShack may cause interference and void the user's
authority to operate the equipment.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Product:
Digital Photo Viewer
Model:
63-1078
Responsible Party:
RadioShack
100 Throckmorton
Fort Worth, TX 76102
Phone:
817-415-3200
63-1078
Printed in China
02A04
Advertisement
