Fellowes SB-99Ci Instruction page 5

SAFESENSE ® TECHNOLOGY OPERATION
Stops shredder immediately when hands are too close to the paper entry.
SET-UP AND TESTING
1
2 3
Turn the shredder ( ) Touch test area and SafeSense
®
On to activate SafeSense look for the SafeSense and working properly
® ®
indicator to illuminate
ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING
JAM PROOF SYSTEM*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
DISABLING THE FEATURE
2 3
1
AUTO AUTO AUTO AUTO AUTO
Should you choose to disable the Once disabled, the blue Shredding can continue with the
system, press and hold the auto Auto light is no longer system disabled, however a paper
button (blue) and reverse ( ) illuminated (To re-engage, jam may occur with too many sheets
key at the same time repeat step 1) and Remove Paper icon (
will illuminate
* 100% Jam Proof when used in accordance with user manual
SAFESENSE TECHNOLOGY
®
Stops shredder immediately when hands are too close to the paper entry.
DISABLING THE FEATURE
1 2
3
Should the SafeSense The shredder will stop and To deactivate, shift override
®
indicator stay lit without SafeSense will need to be switch to the "not active"
®
touching the opening deactivated position
4
FLASHING INDICATOR
1 2
is active SafeSense is deactivated Shift override switch to
®
when indicator is flashing the "active" position,
reactivating SafeSense
®
3 4 3 5
If jam occurs, press and hold If not cleared, press reverse
forward ( ) key until the ( ) briefly (repeat steps
document is completely through 4 and 5 until shredded)
) the shredder
3
4 5
Once deactivated, the indicator To clear paper, press and
will flash and the SafeSense hold forward ( ) key
®
feature will not function until paper is shredded
ENGLISH ENGLISH ENGLISH H SH ISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH NGLISH NGLISH GLISH GLISH LISH
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
Model SB 99Ci Model SB-99Ci
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
3
*Apply oil across entry
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
Confirm the indicator is no
longer flashing and retest
CLEANING AUTO-START INFRARED SENSORS
by putting your hand on the
test area Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present
TO CLEAN THE SENSORS
1
Turn off and unplug
shredder
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Run shredder once a day in reverse for 15 seconds to clear cutters
If steps 4 and 5 do not clear
jam, reverse paper all the way • Empty wastebasket when bin full indicator light is illuminated using bag # 36053
out, remove several sheets
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.
and refeed
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 40 minutes to cool down.
ACCESSORIES
Maintenance is an important part of protecting your investment. Don't forget oil and shredder bags.
®
6
Shredder oil – #35250
PROBLEM STILL NOT SOLVED?
Once the paper is cleared,
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
reactivate the SafeSense
®
assistance and personal attention.
feature (To re-engage,
see Operations)
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
3 4
3
2
Press forward Shred one sheet Press and hold forward ( )
2-3 seconds
.
(Note: two paper detection sensors are located in the center of the paper entry)
2 4
Lift CD flap. Locate Auto-start Dip cotton swab in
infared sensor. rubbing alcohol.
SB-99Ci Shredder
plastic bag – #36053
5
Using cotton swab, wipe
away any contamination
from the paper sensors.
5