Fellowes SB-99Ci Instruction page 4

BASIC SET UP AND SHREDDING OPERATION
CASTER INSTALLATION
1 2 3
PAPER OR CD/CARD
1 2
Continuous operation:
20-minute maximum Plug in and put
Press ( ) ON to
disconnect power
activate (blue)
NOTE: Shredder runs briefly
switch in ON (I) position
after each pass to clear entry.
Continuous operation beyond
20-minutes will trigger
40-minute cool down period.
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
SET-UP AND TESTING
3
2
If too many sheets, indicator will Remove several sheets until the
light up to red and shredder will indicator is below red and the
not take paper shredder will take the paper
AUTO AUTO
Feed into paper entry
2 3
and release
Shredder will take fewer sheets, Increase the number of
but if indicator is below yellow, sheets being fed up to the top
AUTO
you can add more sheets without yellow light to maximize your
fear of jamming productivity
*100% Jam Proof when used in accordance with user manual AUTO AUTO
4 5
3 4 6
Feed paper straight into To shred CDs rotate Hold CD/card at edge, When finished
paper entry and release CD flap into place feed into CD/Card flap shredding set
entry and release to OFF ( )
MISFED PAPER
2 3
AUTO AUTO
1 Automatic correcting action If Remove Paper icon (
will power through the misfed illuminated, press reverse and
paper, so shredding can
remove paper
continue (do not add more
paper during flashing)
If paper is misfed and
2 3
stops shredding,
all indicator lights
will illuminate and
shredder will pause for
3-6 seconds
If there is too much paper for Reduce paper quantity to an
the shredder to power through, acceptable amount and refeed
it will reverse the paper out for into paper entry
easy removal
) is
3