Care And Cleaning - Heat Controller B-VFH09MA-1 Installation, Operation & Maintenance Manual

Heat Controller

Care and Cleaning

• Disconnect the power supply before performing any cleaning or maintenance.
• Be sure water does not get inside the unit when cleaning. To avoid electrical shock
and damage to the unit.
• The cabinet can be cleaned with a dry or damp cloth. Do not use harsh chemical
cleaners, wax, or polish.
NoTe: Do not touch the fins of indoor coil during the
cleaning to avoid personal injury. The fins of the indoor
unit have sharp edges that can cut. Failure to clean
the filter can make the unit inefficient and possibility
inoperable.
Remove the air filter
1
Lift up the front panel.
Pull the air filter downwards to take it out
as shown in Fig. 3 and 4.
Clean the air filter
2
Use a vacuum cleaner to remove dust.
If the filter is dirty, wash with warm water
and mild detergent.
Air dry the filters indoors and avoid direct sunlight.
NoTe: Cleaning with extremely hot water over
113°F (45°C) can deform or discolor the filter.
Reinstall the air filter
3
Reinstall the filters by pushing back into place
along the direction of the arrows shown.
Close the panel.
!
CAUTION!
Caution
Cleaning the Air Filter (every 3 months)
VFH InverterFlex
13
- Ductless Mini-Split
®
(Fig. 3)
(Fig. 4)