DRYER
GAS CONVERSION
WARNING! Improper installation and/or adjustment of orifices and gas valves
can result in fire, explosion, and suffocation. Installation and
adjustment should be performed ONLY by a trained, licensed, and
certified gasfitter.
NOTICE!
The dryer is shipped from the factory equipped for natural gas.
1. Close the adjustment screw.
DLE8377xM/DLG8388xM
DLE7177WM/DLE7188WM
(Natural to Propane)
Notice there is a nut on the adjustment
screw. This nut is secured to the thread
with a sealing compound. The nut is
pre-positioned to the place the valve
would be properly adjusted for LP. It's
purpose is to provide a shoulder for
positioning the adjustment screw if the
dryer is converted from natural gas to
propane.
NOTE: The conversion should be
performed by a licensed and certified
gasfitter.
Page 40 of 60
TRAINING MANUAL