COMBO
Unplug the COMBO before disassembly and repair.
WM3677 COMBO
DISASSEMBLY and REPAIR
CONTROL PANEL
Page 35 of 68
1.
Remove the two screws on the
top of the back plate.
2.
Slide the top plate backward
and lift it, as shown.
3.
Disconnect the Display PWB
connectors. (3 connectors)
4.
Remove the dispenser drawer.
5.
Remove the two screws behind
the dispenser drawer.
6.
Lift off the left side of the
Control Panel and pull it out.
7.
Remove the nine screws that
secure the PWB.
8.
Remove the PWB.
9.
Reassembly is the reverse of
these steps.
TRAINING MANUAL