Lenovo ThinkCentre Hardware Maintenance Manual page 77

3. Remove the three screws that secure the lift stand. Keep the three screws, and put them aside. You will
need them when installing the lift stand. Remove the lift stand from the computer.
Figure 7. Removing the lift stand
4. To reinstall the lift stand, insert the two tabs
computer wall mount, and then slide the lift stand toward the bottom of the computer. Align the three
screw holes in the lift stand with those in the computer wall mount and then install the three screws to
secure the lift stand.
1
on the lift stand into the corresponding holes in the
.
Chapter 8 Replacing FRUs
71