Default Shutter; Typical Applications; Certifications And Approvals - Bosch LTC 0630 Series Brochure & Specs

2 | LTC 0630 Series Dinion2X Day/Night Camera
Privacy masking
Four different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the scene to
be masked.

Default Shutter

The default shutter speed captures fast moving objects
when sufficient light is available. When light levels fall and
other adjustments have been exhausted, the shutter
speed reverts to a standard setting to maintain sensitivity.
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion cameras.
Technicians can check status, change camera settings and
even update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation time,
provides for more accurate set-up and adjustment, and
improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.
Lens Wizard
The Lens Wizard automatically detects the lens type and
helps focus the lens at the maximum opening to ensure
proper focus is maintained throughout the 24-hour cycle.
No special tools or filters are required.
Ease of installation
Several features are available that make installation easy:
•
Power and alarm connections have cable connectors
which can be removed even when the camera is
mounted.
•
A built-in test pattern generator produces signals to
test and fault-find cables.
•
A multi-language On-Screen Display (OSD) increases
user compatibility.
Programmable Modes
Six independent, pre-programmed operating modes
support typical applications, but are fully programmable
for individual situations. Switching between modes is easy
via Bilinx or the external alarm input.
High efficiency
A high efficiency power supply improves maximum
operating temperature.
Video Motion Detection
The built-in video motion detector allows you to select a
programmable area with individual thresholds. The global
scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on
or off the indoor or security lighting. When motion is
detected, alarms can be displayed in the video signal, the
output relay can be closed or an alarm message can be
transmitted via Bilinx.
SensUp Dynamic
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight
for illumination.

Typical applications:

•
Outdoor perimeters
-
low light
-
IR light
•
Traffic monitoring
-
highway
-
traffic intersections
-
emergency response coordination
•
Tunnels
•
Car parks (outdoor)
•
Restricted access locations such as:
-
prisons
-
ports / freight terminals
-
military facilities
-
border control and homeland security
•
Casino and gambling centers.

Certifications and Approvals

Region Certification
Europe CE Declaration of Conformity
USA UL
FCC Declaration of Conformity
Canada CSA
Electro Magnetic Compatibility
Emission EN55022 class B, FCC part 15 class B, EN6100-3,
EN50121-4
Immunity EN50130-4 (CE), EN50121-4 (CE)
Vibration Camera with 500 g (1.1 lbs) lens according to
IEC60068-2-6
Safety
LTC0630/11: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
UL60950, CAN/CSA No. 60950
LTC0630/51: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
EN61000-3-2 2000 +A2:2005,
EN61000-3-3 1995 +A1:2001 +A2:2005
LTC0630/21 and LTC0630/61: UL1950-1, CSA 22.2 No. 950-1,
EN60950-1 (CE), UL60950, CAN/CSA No. 60950