Remove The Spi Board - HP ProLiant DL580 User Manual

After the display fully ejects, rotate the display downward to view the LEDs.
2.

Remove the SPI board

To remove the component:
Power off the server.
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel (on page 26).
3.
Disconnect all cables from the SPI board.
4.
IMPORTANT:
number through RBSU
If replacing the SPI board or clearing NVRAM, you must re-enter the server serial
("Re-entering the server serial number and product ID" on page 79).
Operations 29