Panasonic CQ-VD7003W2 Operating Instructions Manual page 30

MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: no memory clear.
NO
The display returns to the previous one.
YES : clears the memory to default settings
CANCEL : no memory clear.
OK : proceed.
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
appears when
REALLY?
is selected.
YES
OTHER
Other settings
BEEP
(Beep setting)
OFF
: operation sound (beep) OFF
ON
: operation sound (beep) ON
(Setting ACC selection ON and
ACC SELECT
OFF)
OFF
: set to OFF if your car has no ACC posi-
tion.
ON
: set to ON if your car has ACC position.
Note:
¡For a ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
OFF
main unit through the remote control.
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
OFF
ACC
IGN
REMOTE CONTROL
(Remote control setting)
FRONT
: main unit-specific remote control
REAR
: rear monitor (option)-specific remote
control
MENU DISPLAY
(Language setting)
ENGLISH
: displays the menu in English
CHINESE
: displays the menu in Chinese
30
default:
ON
default:
ON
default:
FRONT
default:
ENGLISH
31
CQ-VD7003W