Location Of User's Control - Sharp 27SF560 Service Manual

LOCATION OF USER'S CONTROL

Front Panel
POWER
Press On.
Press again Off.
REMOTE CONTROL
SENSOR
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD (0 - 9)
Sets the channel.
FLASHBACK
Returns to previous channel.
•
(DOT)
Sets the channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
( + ) Increases sound.
( – ) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will
be for TV and VCR control.
In CATV/DVD position, signals sent
will be for cable TV converter and
DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from
their actual appearance.
VOLUME UP/DOWN
( + ) Increases sound.
( – ) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press
for 4 seconds.
POWER
Press again
TV DVD
VCR DISPLAY INPUT
• Temporarily displays receiving
1 2 3
4 5 6
INPUT
Press
7 8 9
INPUT 1 mode.
FLASHBACK ENTER
Press twice
0
video INPUT 2 mode.
PERSONAL PREFERENCE
Press 3 times
A B C D
video INPUT 3 mode or
CH
COMPONENT mode.
VOL VOL
ó + Press 4 times
CH
the original TV mode.
MENU MUTE
ENTER
CATV TV
• Used to confirm the channel
DVD VCR
REW PLAY FF • Used in some instances where a
CH/SKIP
PAUSE STOP REC
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
• Moves the " æ " mark on the MENU
TV CATV VCR DVD
MUTE
Press
Press again
5
INSIDE DOOR
VIDEO/AUDIO IN 2
TERMINALS
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
Displays receiving channel
Removes display.
channel when in Closed Caption
mode.
Switches to external video
Switches to external
Switches to external
Switches back to
selection and Personal Preference
channel.
Cable Converter Box requires an
"enter" command after selecting
channels, when using the REMOTE
KEYPAD button.
screens.
Mutes sound.
Restores sound.
27SF560