Removing The Battery; Installing Battery - Fujitsu Siemens Computers CELSIUS H Series Easy Manual

Ports and operating elements

Removing the battery

► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay
an anti-slip cloth on this surface to prevent the notebook from being scratched.
1
2
1
► Press the two unlocking lugs (1), hold them down and lift the battery slightly.
► Remove the battery from the battery compartment (2).

Installing battery

► Position the battery at the edge.
► Push the battery into the battery compartment until you feel it engage.
16 A26391-K226-Z120-1-7619, edition 1