Power Button Board - HP Pavilion g7 Maintenance And Service Manual

4. Lift the speakers (4) to remove them from the top cover.
Reverse this procedure to install the speakers.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the speakers (see
Remove the power button board:
1. Turn the top cover upside down, with the front toward you.
50 Chapter 4 Removal and replacement procedures
Battery on page 31).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 43).
Top cover on page 46).
Speakers on page 49).
32).
33).
36).
Spare part number
682751-001