Philips 15MF605T/17 Service Manual page 6

6
Magnavox LCD TV
Go to cover page
1.Power : Power On/Standby
2.Numerica keys : (0~9) ,Channel setting
3.Mute : Sound mute function
4.Prev-CH : Recall previous CH
5.Menu : Main menu select and OK key
6.VOL- : Left/Volume Down
7.OK : OK
8.Source : Source select for PC,Tuner,CVBS,S-video,HD
9.Closed cap. : Closed caption on/off
nd
10.SAP(2 audio) : Sound select
11.CH- : Down/Channel Down
12.PIP : PIP size select (Small/Medium/Large/PBP)
13.VOL+ : Right/Volume Up
14.CH+ : Up/ Channel Up
15.Display Format : Select display format (4:3, Expand 4:3,
Compress 16:9)
16.Smart Sound : Select sound effect
(Personal/News/Music/Theatre)
17.Smart Picture : Select picture effect (Personal/Movie/Sports/
weak signal/multimedia/Night)
18.Sleep Timer : Sleep timer 15,30,60,120,180,240 OFF
2
3
5
6
13
8
7
9
Installation
ANTENNA CONNECTION
Acombination antenna receives normal broadcast channels
(VHF 2 13 and UHF 14 69). Your connection is easy because
there is only one 75
your TV, and that s where the antenna goes.
1
18
BASIC CABLE TV CONNECTION
Your Cable TV signal into your home may be a single, 75 (ohm) cable.
If so, this connection is very simple. Follow the step below to connect
your Cable TV signal to your new LCD TV.
1.Connect the Cable TV signal to one end of the supplied L-Adapter as
17
shown, and connect the other end of the adapter to the TV jack on the
LCD TV.
16
15
CABLE BOX CONNECTIONS
4
If you have a Cable Box, follow either set of these steps to complete
your connections.
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to the LCD TV.
1.Connect the Cable TV signal to the IN jack
12
(or RF IN or CABLE IN) on the Cable Box.
2.Connect an RF coaxial cable (not supplied) to the OUT
jack (or TO TV or RF OUT) of the Cable Box.
3.Connect the other end of the coaxial cable to one end of the supplied
L-Adapter as shown, and connect the other end of the adapter to the TV
11
14
jack on the LCD TV.
4.Plug the DC adapter into the DC IN 16V jack on the LCD TV. Plug the
power cable into an outlet.
5.Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3
or 4. Set the TV to the same channel. When watching TV programming,
change channels at the Cable Box, not the LCD TV.
10
(ohm) antenna jack on the back of