Advertisement
INSTALLATION
1. Set the ALC selector on the camera to DC position.
ALC
ELC
DC VIDEO
(Fig. 1)
2. Mount the lens by turning it clockwise on the lens mount of the
camera.
(Fig. 2)
3. Connect the lens cable to the Auto Iris Lens Connector on the
side of the camera.
ADJUSTMENT
1. Loosen the Focus Lock Screw by turning it counterclockwise,
and then set this screw to the "F" position.
F
N
8X
TV LENS
5 ~ 40 mm 1:1.6
1
3
WV-LZ62/8
(Fig. 3)
ELC
ALC
DC
VIDEO
Focus lock screw
Zoom ring
T
W
2. Turn the Zoom Ring toward "W" until it stops.
F
T
N
W
8X
TV LENS
5 ~ 40 mm 1:1.6
1
3
WV-LZ62/8
(Fig. 4)
3. Shoot an object more than 10 meters (30 feet) away to adjust
the flange-back of the camera.
4. Loosen the screws on the flange-back adjusting ring of the cam-
era, then turn this ring to bring the object into focus.
Focus adjustment
for CS-mount lens
(Fig. 5)
Caution: Do not turn this ring too far counterclockwise as this
could damage the inner glass and CCD image sensor.
5. Tighten the screws on the flange-back adjusting ring.
6. Turn the Zoom Ring to a point between "T" and "W" to chose
the desired angular field of view.
7. Bring the desired object into focus by setting the Focus Lock
Screw.
8. Tighten the Focus Lock Screw by turning it clockwise.
WV-LZ62/8
Turn
Focus adjustment
for C-mount lens
Advertisement
