Media Information; Network Settings - Panasonic SC-PMX9 Owner's Manual

Hide thumbs Also See for SC-PMX9:
Table of Contents

Advertisement

"iPod_Dock" (Using Lightning connector):
• Make sure that the iPod/iPhone is fully inserted and its
back is resting against the cushion pad.
• Make sure to remove the iPod/iPhone from its case.
• Make sure to align your iPod/iPhone with the connector
when inserting.
"iPod_Port":
• Use the dedicated USB cable (not supplied) for iPod/
iPhone/iPad.
• Insert the USB device directly. Do not use any USB
extension cable.
• Before removing the USB device, select a source other
than "USB".
Disc tray:
• Remove the CD only after it stops rotating.
Charging an iPod/iPhone/iPad
Charging starts when an iPod/iPhone/iPad is connected to
this system.
• During standby mode, charging will not start from the
"iPod_Port" connection, however it will start as usual from
the "iPod_Dock" connection.
- To charge from the "iPod_Port" connection, start the
charging before turning this unit to standby mode.
• See the iPod/iPhone/iPad display for its battery charging
status.
• Disconnect the iPod/iPhone/iPad if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.

Media information

• Please be aware that Panasonic accepts no responsibility
for the loss of data and/or information.
Compatible iPod/iPhone/iPad
Compatible with "iPod_Dock" connection
(Using Lightning connector)
iPhone 5
iPod touch (5th generation)
iPod nano (7th generation)
6
Compatible with "iPod_Port" connection
[Using dedicated USB cable (not supplied)]
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad (3rd, and 4th generation) / iPad 2 / iPad / iPad mini
iPod touch
1st, 2nd, 3rd, 4th, and 5th generation
iPod nano
2nd, 3rd, 4th, 5th, 6th, and 7th generation
Note:
• Compatibility depends on the software version. Update
your iPod/iPhone/iPad to the latest software before using it
with this unit.
• Read the User Guide of the iPod/iPhone/iPad for the
operating instructions.
Compatible USB devices
• USB devices that support bulk-only transfer.
Note:
• Files are defined as tracks and folders are defined as
albums.
• Track must have the extension ".mp3", ".MP3", ".flac" or
".FLAC".
• This system can access up to:
- 255 albums (including root folder)
- 2500 tracks
- 999 tracks in one album
• CBI (Control/Bulk/Interrupt) is not supported.
• Some files can fail to work because of the sector size.
• NTFS file system is not supported (only FAT16/FAT32 file
system is supported).
Compatible CD
• This system can play CD-R/RW with CD-DA or MP3 format
content.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder) and
20 sessions
• Recordings will not necessarily be played in the order you
recorded them.

Network settings

You can stream music from an iOS device (iPhone, iPod,
iPad), an Android™ device or a Mac/PC to this system's
speakers by using the AirPlay or DLNA feature.
To use these features, this system must join the same
network as the AirPlay compatible device (
DLNA compatible device.
• It is also possible to use AirPlay without a network router.
(
10, "Directly streaming to this system (AirPlay)")
• Switching between a wired LAN connection and a wireless
LAN connection may cause the connection settings to be
(as of January 2013)
initialized. In that case, make the settings again.
• For a stable connection to the network, a wired LAN
connection is recommended.
Wired LAN connection
Normally, just connecting a LAN cable will complete the
setup.
e.g.,
1
Connect the main unit to a broadband router, etc.
using LAN cable while the AC power supply cord is
disconnected.
2
Connect the AC power supply cord to the main unit
and turn this system on.
This unit is ready for use when "
the display.
10) or the
Broadband router, etc.
LAN Cable
(not supplied)
" is indicated on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents