Table of Contents
Advertisement
3 OPERATING INSTRUCTIONS
3.1. General
This section provides a brief guide to the operation and facilities available on the telephone handset. Refer to the Operating
Instructions supplied with the telephone for full operational information.
3.2. Liquid Crystal Display
The telephone handset has a graphical chip on glass display.
The following icons are available:
Indicates GSM signal strength:
Indicates GPRS signal strength:
Indicates that it is possible to make an emergency call.
Menu
The number of the feature indicated by the pointer. To access a feature enter the menu number on the keypad.
Number
Displays the battery charge level:
Battery is at full charge
Battery requires charging.
The battery icon scrolls during charging.
Menu Icon
Displays a small icon related to the current status of the telephone:
telephone is roaming on a non-home network.
using the "Call Divert" feature or the telephone has Call-Divert set;
shows that vibration alert is switched on;
shows that the telephone is in silent mode.
flashes to indicate that there are unread text (SMS) messages. Lit when SMS area is full;
O
indicates the telephone is locked;
shows that the normal character set has been selected;
shows that the Greek character set has been selected;
shows that the Extended character set has been selected;
shows that numbers have been selected for text entry
T9
indicates that Tegic T9® predictive text mode is selected.
Information
Displays a small icon according to the current menu level:
Icon
?
indicates the alarm is set.
>
indicates the current Phonebook is sourced from the Mobile Phonebook.
<
indicates the current Phonebook is sourced from the SIM Phonebook.
Indicates that the navigation key (
Option Area Pressing the select key (
Following some operations, the display will clear automatically after three seconds or after pressing any key except
MMCD020801C8
Service Manual
Figure 3.1: Liquid Crystal Display
strong signal area;
strong signal area;
) can be pressed. Each arrow will light individually to indicate which direction is valid.
) will select the option displayed in the option area of the display.
Section 3
– 3 –
OPERATING INSTRUCTIONS
10580-1
weak signal area.
weak signal area.
.
Issue 1
Revision 0
Advertisement
Table of Contents
