Additional Information; Troubleshooting; Error Messages - Pioneer DEH-X3500UI Owner's Manual

Appendix

Additional information

Troubleshooting

Symptom Cause Action
The display You did not per- Perform operation
automatically form any opera- again.
returns to the tion within
ordinary dis- about 30 sec-
play. onds.
The repeat Depending on Select the repeat
play range the repeat play play range again.
changes un- range, the se-
expectedly. lected range
may change
when another
folder or track is
being selected
or during fast
forwarding/re-
versing.
A subfolder is Subfolders can- Select another re-
not played not be played peat play range.
back. when FLD (fold-
er repeat) is se-
lected.
NO XXXX ap- There is no em- Switch the display
pears when a bedded text in- or play another
display is formation. track/file.
changed (NO
TITLE, for ex-
ample).
The unit is You are using a Move electrical
malfunction- device, such as devices that may
ing. a cellular be causing the in-
There is inter- phone, that terference away
ference. transmits elec- from the unit.
tric waves near
the unit.
16
En

Error messages

When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the error
message.
Common
Message Cause Action
AMP ERROR Unit fails to op- Check the speak-
erate or speaker er connection. If
connection is the message fails
incorrect; pro- to disappear even
tective circuit is after the engine is
activated. switched off/on,
contact your deal-
er or an author-
ized Pioneer
Service Station
for assistance.
CD player
Message Cause Action
ERROR-07, The disc is dirty. Clean the disc.
11, 12, 17, 30
The disc is Replace the disc.
scratched.
ERROR-07,
There is an elec- Turn the ignition
10, 11, 12,
trical or me- switch OFF and
15, 17, 30, chanical error. back ON, or
A0 switch to a differ-
ent source, then
back to the CD
player.
ERROR-15 The inserted Replace the disc.
disc is blank.
ERROR-23
Unsupported Replace the disc.
CD format.
Additional information
Message Cause Action
FORMAT Sometimes Wait until the
READ there is a delay message disap-
between the pears and you
start of playback hear sound.
and when you
start to hear any
sound.
NO AUDIO The inserted Replace the disc.
disc does not
contain any
playable files.
SKIPPED The inserted Replace the disc.
disc contains
DRM protected
files.
PROTECT All the files on Replace the disc.
the inserted
disc are em-
bedded with
DRM.
USB storage device/iPod
Message Cause Action
FORMAT
Sometimes Wait until the
READ
there is a delay message disap-
between the pears and you
start of playback hear sound.
and when you
start to hear any
sound.
NO AUDIO There are no Transfer the audio
songs. files to the USB
storage device
and connect.
The connected Follow the USB
USB storage de- storage device in-
vice has secur- structions to dis-
ity enabled. able the security.
Message Cause Action
SKIPPED The connected Play an audio file
USB storage de- not embedded
vice contains with Windows
files embedded Media DRM 9/10.
with Windows
Mediaä DRM 9/
10.
PROTECT All the files in Transfer audio
the USB storage files not em-
device are em- bedded with
bedded with Windows Media
Windows Media DRM 9/10 to the
DRM 9/10. USB storage de-
vice and connect.
! Connect a USB
N/A USB
The USB device
connected to is Mass Storage
not supported Class compliant
by this unit. device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB The USB con- Check that the
nector or USB USB connector or
cable has short- USB cable is not
circuited. caught in some-
thing or dam-
aged.
CHECK USB The connected Disconnect the
USB storage de- USB storage de-
vice consumes vice and do not
more than maxi- use it. Turn the
mum allowable ignition switch to
current. OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.