Memory Card Direct Printing Function - Canon i900D Service Manual

4.1.5 Card slot attribute
The card slot attributes can be changed by operating the Memory Card Startup Utility on the host
computer.
Card Slot Attribute
Read only
Read/Write
Note: When the memory card is inserted to the printer, this attribute cannot be changed.
The card slot attribute becomes Read only by soft power-on.

4.2 Memory Card Direct Printing Function

4.2.1 Print mode
Print all:
Specify images:
Print index:
Select layout:
DPOF:
4.2.2 Print quality
In the Memory Card Direct Printing, two types of High or Standard print quality can be selected. For
the resolution for each print quality, refer to 3. PRINT MODE.
4.2.3 Supported image formats
Images in the following formats can be selected when using direct printing:
DCF, CIFF, EXIF (JPEG, Tiff), EXIF-R98, JFIF
JPEG image compatibility with i900D/i905D:
Format:
Pixel sampling:
Samples per pixel:
Maximum pixel size: Approx. 4,800(H) x 3,600(V)
TIFF image compatibility with i900D/i905D:
Format:
Pixel composition:
Note: Non-supported images will not be printed, and the image skipped (not printed).
- When non-supported images are detected, "No images" is displayed on the LCD viewer.
- Examples of non-supported files (note, some files may be printed even out of the specifications):
TIFF (CMYK)
JPEG (CMYK)
TIFF (LZW compressed)
TIFF (JPEG compressed)
TIFF (ZIP compressed)
TIFF (over 5,000 pixels)
JPEG (over 5,000 pixels)
JPEG (Progressive)
JPEG (sampling ratio: 4:4:4)
TIFF (16 bit channel)
- Certain images cannot be printed although they are within image format specifications.
State
To protect the data on the memory card, writing to the memory card
inserted in the card slot is prohibited. (Default setting)
Writing data to the memory card inserted in the card slot is allowed. (Use
of memory cards where the write protection is set to the Read Only mode
is prohibited.)
In this attribute, printing from the memory card cannot be performed.
Prints all images on the memory card.
Specifies the number of copies to be printed per image. It is not possible to specify
the layout such that multiple images are included in one page.
Prints a single select image. (Multiple copies can be specified.)
When printing to plain paper in Standard mode, a thumbnail image of the image
file is enlarged. If the image file contains no thumbnail images, a full resolution
image is enlarged to print.
Selects a layout (containing multiple images in one page), and specify the image to
be printed in the layout.
Performs printing according to the DPOF setting in the memory card.
Baseline DCT
4:4:4, 4:2:2, 4:2:0
1 or 3
RGB uncompressed or YCC uncompressed
8 bits each (for RGB and YCC)
2 - 8