Harman Kardon DVD5 Service Manual page 36

DVD5 harman/kardon
2
Figure 2. Flex Cables Required for Replacing New DVD-5 Loader
Figure 3. Original DVD5 POWER SUPPLY Power connector header (See h/k bulletin # HK2002-05)
a) Early Version: Molex Connector should be replaced with 10-Pin FCC connector, part# 55284430 on
POWER SUPPLY module. See Figure 4. After replacing original molex connector, connect the loader and
power supply with 10 wire - FCC CABLE, part# 55174870. Connect Pin 1 Pin1 and Pin 10 Pin 10.
Refer to Figure 4 and Figure 6.
35