Printhead - Epson Stylus PhotoR280 Service Manual

EPSON Stylus Photo R280/R285/R290

4.4.2 Printhead

When removing the Head FFC Cover and the Head FFC
Cover Inner, do not use tools with sharp ends as the FFC may
get damaged.
Be careful not to damage the FFC and cables when
disengaging the hook of the CSIC Assy.
Parts/Components need to be removed in advance
Printer Cover / Paper Support Assy / Upper Housing
Removal procedure
See the section given below on how to unlock the carriage.
• "4.1.8 How to Unlock the Carriage"
1. Move the CR Unit to the center, open the Cartridge Cover and remove all Ink
Cartridges.
2. While disengaging the hook of the Head FFC Cover with a flathead
screwdriver, slide the Head FFC Cover downward and remove it.
Screwdriver
Figure 4-45. Removing the Head FFC Cover
Chapter 4 Disassembly/Assembly
Head FFC Cover
Removal Direction
Hook
4.4.2 Printhead (Disassembling the Printer Mechanism)
3. Disconnect the CSIC FFC from the connector (
CSIC FFC
Figure 4-46. Removing the CSIC FFC
4. While disengaging the hook of the Head FFC Cover Inner with a flathead
screwdriver, slide the Head FFC Cover Inner upward and remove it.
Head FFC Cover Inner
Hook
Figure 4-47. Removing the Head FFC Cover Inner
Revision B
) on the CSIC Board.
Removal Direction
Screwdriver
72