Maintenance; Maintenance System Table - Sharp MX-LCX3 Service Manual

[7] MAINTENANCE

MX-LCX3

1. Maintenance system table

✕ : Checking (clean, replace or adjust as required)
No. Part name
1 Pick-up roller/each paper feed roller
2 Torque limiter
3 Each transport rollers
4 Each transport paper guides
5 Each gears
6 Each belts
7 Each sensors
: Cleaning ▲ : Replace ∆ : Adjust ✩ : Lubricate
When Main unit
calling maintenance cycle
As a rough guide, these rollers should be replaced when the LCC paper feed
✕
counter reaches a value of 100K (Sim22-9) or when one year has elapsed
since the start of use.
As a rough guide, the torque limiter should be replaced when the LCC paper
✕ ✕
feed counter reaches a value of 800K (Sim22-9).
✕
✕ ✕
✕
✕
✕
MX-LCX3 MAINTENANCE 7 – 1
Service Manual
Remarks
: Position shift