Connecting To A Network - Samsung 5 Series User Manual

You can set up your lV so that it can access SMART lV applications through your local area network
(LAN) using a wired or wireless connection.
~
After you have "physically" connected your TV to your network, you must configure the network
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 18) or after the Initial Setup process, through the TV's menu (see page 26).
Network Connection - Wireless
You can connect your lV to your local area network (LAN) through a standard wireless router or modem.
The LAN Port on the Wall
~-----------------------------· ------ --'
This lV supports the IEEE 802.11 a/b/g and n communication
IEEE 802.11 n. If you play video using IEEE 802.11 a, b, or g, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless router or modem) to transmit an encrypted
security code called an access key.
Your lV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED,
• Encryption Type: WEP,
If you select Pure High-throughput (Greenfield) 802.11 n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung lVs will not support a connection in compliance with new
Wi-Fi certification specifications.

Connecting to a Network

Wireless IP Sharer
(router having DHCP Server)
LAN Cable (Not Supplied)
WPAPSK,
TKIP, AES
r~~
((<
\ L -:--====-_::::;·"--=:===--=~JJ
- - - -- -
~------------------------------------~
protocols. Samsung recommends using
WPA2PSK
- -- - - - - -
c~~ =,- ~ =:~-5