Only For Training And Service Purposes - LG GC900F Service Manual

2. PERFORMANCE
2.4.5
Item
Receive Frequency
Maximum Input Level
(BLER or R), 16QAM Only
2.4.6
Item
Transmit Frequency
Tx Power Level
Frequency Tolerance
Chip clock Frequency
Tolerance
Spectrum Mask
Transmitter constellation error
(rms EVM)
Spurious Emissions
Rx Min input Sensitivity
Rx Max input Sensitivity
Rx Adjacent Channel
Rejection
LGE Internal Use Only
HSDPA Receiver Spec..
Specification
869 MHz ~ 894 MHz
Sub-Test : 1=1/15, 2=12/15, 3=13/15, 4=15/8, 5=15/7, 6=15/0
BLER < 10%
WLAN 802.11g Transmitter and Receiver Spec.
Specification
2400 MHz ~ 2483.5 MHz ( CH1~CH13 )
≤ 20dBm under (Europe), ≤ 30dBm under (USA)
within ±25 PPM
within ±25 PPM
≤ -20 @ ±11MHz offset (9Mhz ~ 11MHz)
≤ -28 @ ±20MHz offset (11MHz ~ 20Mhz)
≤ -40 @ ±30MHz offset (20MHz ~ 30Mhz)
≤ -5dB
< -36 dBm @ 30MHz ~ 1GHz
< -30 dBm above @ 1GHz ~ 12.75GHz
< -47 dBm @ 1.8GHz ~ 1.9GHz
< -47 dBm @ 5.15GHz ~ 5.3GHz
PER ≤ 10%
-82dBm@6Mbps, -81dBm@9Mbps, -79dBm@12Mbps
-77dBm@18Mbps, -74dBm@24Mbps, -70dBm@36Mbps
-66dBm@48Mbps, -65dBm@54Mbps
≥ -20dBm(6,9,12,18,24,36,48,54Mbps) @ PER ≤ 10%
PER ≤ 10%,
ACR ≥ 16dB@6Mbps, ACR ≥ 15dB@9Mbps,
ACR ≥ 13dB@12Mbps, ACR ≥ 11dB@18Mbps,
ACR ≥ 8dB@24Mbps, ACR ≥ 4dB@36Mbps
ACR ≥ 0dB@48Mbps, ACR ≥ -1dB@54Mbps
※ACR shall be measured by setting the desired signal's strength
3 dB above the rate-dependent
sensitivity specified in min input sensitivity
GC900 service manual
2110 MHz ~2170 MHz
or R >= 700kbps
13
- 16 - Copyright © 2009 LG Electronics. Inc. All right reserved.

Only for training and service purposes