Picture Processing - Canon PowerShot A100 Service Manual

CHAPTER 2. TECHNICAL DESCRIPTION

2.2.2 Picture Processing

1) The drive pulse of the CCD sensor is created by both clock from DSP and TG that is operated by
sync. signal.
The picture signal by the drive pulse is output from CCD sensor.
The output signal of the CCD picture is converted to the signal processing and the digital data by
the CDS and A/D converter, and is sent to the DSP.
2) The DSP circuit performs the following signal processing.
• Processes the picture data (using the SDRAM).
• Writes and reads the picture data to and from the CF card.
• Outputs analog video signal to the LCD.
3) The video signal that is supplied form the DSP is controlled by the LCD driver and is displayed
on the LCD.
2-4