Page 2
Congratulations on the purchase of your new thermostat! Over 100 years of Honeywell engineering expertise went into the making of this thermostat in an effort to provide you with a more comfortable and convenient living environment. • Simple and Easy to Use™. The temperature settings.
Both heating and cooling are off. HEAT: Normal setting for months when your home needs heating. Digital display shows a flame PROGRAMMING The thermostat is already programmed for your convenience with the time and temperature settings in Table 1. when heating is on. 69-1099...
Page 4
Table 1. Preprogrammed Time/Temperature Settings. Start Heating Period Time Setpoint WAKE 6:00 70 F (21 C) SLEEP 10:00 62 F (16.5 C) WAKE is the time period you want the house at a comfortable temperature during the day. Cooling SLEEP is the time period you can set for an Setpoint energy-savings temperature while you are sleeping.
Page 5
To change the preprogrammed time/tempera- ture settings, follow steps 2 through 6. If not, press the key until End is displayed or the thermostat will automatically return to normal operational mode within five minutes. until End is to set current time.
SLEEP time. 5. Set SLEEP Temperature. Press Press to set desired SLEEP temperature. 6. Run Program Press End is displayed for five seconds indicating the end of program- ming. The thermostat then displays current time and room temperature. 69-1099...
Press until desired tempera- ture is displayed. NOTE: To cancel your TEMPORARY change, Hold Function. To hold the thermostat at one temperature indefinitely, program both WAKE and SLEEP to the same temperature. TEMPORARY is displayed. The TEMPORARY change is TEMPORARY...
ENERGY SAVINGS You can save energy with this thermostat during the heating season by automatically lowering the temperature setting 5 F (3 C) to 10 F (5 C) at night. You can also save energy during the cooling season by automatically raising the temperature setting during the day before you leave for work or school.
Damage to compressor possible. Do not operate cooling if outdoor temperature is below 50 F (10 C). Refer to manufacturer recommenda- tions. IMPORTANT Temporary protection delay protects compressor; the thermostat allows the compressor to remain off for five minutes before restarting. 69-1099...
Page 10
Temperature setting is too warm or too cool. If you have any questions concerning this thermostat, call Honeywell Customer Assistance at 1-800-468-1502, Monday - Friday, 7:00 am - 5:30 pm, Central time. For service, contact your local heating and cooling contractor:...