Common Interface; Software Upgrade And Licences; Searching For New Software; Network Upgrade - Toshiba TV Manual

CONTROLS AND FEATURES

Common Interface

The Common Interface Slot, situated on the side of the television,
enables the insertion of a CAM (Conditional Access Module) and
card. These are purchased from a service provider and allow
additional subscription broadcasts to be viewed. For
information, see a service provider.
a
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the
CAM. A box will appear on screen to confirm that the
CAM has been inserted.
b
C c
Press MENU / to highlight Setup icon.
c
B C c
Press / to highlight System Setup icon and
press OK.
d
B b
Press or to select DTV Settings and press OK.
e
B b
Press or to select Common Interface and press
OK.
f
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may occur automatically
if instigated by the broadcaster. This could cause the
cancellation of any Reminders/Recordings during this
process.
• Some CI or CI+ CAM may not be supported.
• CI+ operation is not guaranteed except for Canal Ready DTT
services on suffix FC models.

Software Upgrade and Licences

Searching for New Software

If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the System Setup menu, press
Software Upgrade and press OK.
b
B b
Press or to select Search for New Software.
c
Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
48 %...
If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.

Network Upgrade

TOSHIBA may offer upgrades for the TV's software in the future.
The TV's software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.
a
In the System Setup menu, press B or b to select
Software Upgrade and press OK.
b
Press B or b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.

Software Licences

The licences for the software used in this television are available
a
In the System Setup menu, press B or b to select
Software Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.
70
B b
or to select
CH 31
for viewing.