Mount Thermostat Mounting Plate - Honeywell T8131A Owner's Manual

Mount Thermostat Mounting Plate

Position mounting plate on the wall. Use
a level to make sure mounting plate is
level. Use a pencil to mark the two
mounting holes.
Remove mounting plate from the wall,
and drill 3/16 in. holes in the wall (if
drywall) as marked. For firmer material
such as plaster or wood, drill 7/32 in.
holes. Gently tap the anchors (provided)
into the drilled holes until flush with the
wall.
WIRES THROUGH
WALL OPENING
WALL
22
WALL ANCHORS (2)
MOUNTING
PLATE
MOUNTING
SCREWS (2)
69-0887—1
M1718