HP Pavilion dm4 Maintenance And Service Manual page 68

Entertainment pc

Hide thumbs Also See for Pavilion dm4:

Table of Contents

If it is necessary to remove the display brackets, remove the two Phillips M2.0×3.0 screws (1) that

secure the brackets to the base enclosure, and the remove the brackets (2).

If it is necessary to replace any of the display assembly internal components, remove the following

screw covers and screws. The display screw covers are included in the Display Screw Kit, spare

part number 608212-001.

(1) Two screw covers on the display bezel bottom edge

(2) Two Phillips M2.5×5.0 screws

Flex the inside edge of the top (1), the left and right sides (2), and the bottom (3) of the display

bezel until the bezel disengages from the display back cover.

Chapter 4 Removal and replacement procedures

Table of Contents

Show Quick Links

Table of Contents