COMPONENT NAMES AND FUNCTIONS
❶
⓬
⓫
❿
➒
➑
Dome Cover
❶
➌
Pan Base : control panning angle of camera
4
2.8 Vari-focal Lens Module
5
Function Setup Switch
➏
Video Output Terminal to Monitor
➐
Rotate base : control rotating angle of camera.
➑
Power Input Connector
➒
Ground Terminal
D & N Input Terminal : You can switch to Day & Night Mode by connecting
❿
MD Output Terminal: Motion detection signals are output through this terminal.
⓫
⓬
Video Output Jack
M
Be sure to connect the Day & Night input terminal to GND when using an external input.
➌
2
➐
2
shield Case
3 ~
mm (F1.2)
8.5
: Display the OSD menu and move the cursor up, down, left,
and right amend or confi rm changes.
When menu is off,
for adjusting focus. move this switch up(TELE) or down(WIDE)
for adjusting zoom.
automatically.
an external signal to this terminal.
4
➏
5
move this switch left(NEAR) or right(FAR)
Short to press this button to fit the focus
English_11