Download
Share
Print this page
  1. Manuals
  2. Brands
  3. LuminAir Manuals
  4. Battery Charger
  5. LC-11
  6. User manual

LuminAir LC-11 User Manual

Full-time intelligent charger
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
Full-time Intelligent Charger

User Manual

Please read the entire manual before using this product.
I. Product features
1.
Charge all 3.6V/3.7V Lithium batteries for Cameras, Cell phones, Camcorders, PDAs, iPods by 5V
mini USB.
2.
Intelligent Polarity Detection.
3.
Fast/trickle charge and maintain in full charge.
4.
Transfer power from Lithium batteries via USB output port to any USB rechargeable devices.
5.
Manual rejuvenate function for over-discharged Lithium batteries or batteries that have not been
used for long time.
6.
LED charging indicators.
7.
Charge second battery via USB port simultaneously.
8.
Built-in safety protections, Over Voltage, Short Circuit and over-time.
II. Contents
Charger main unit
AC Adapter
III. Important Safety Tips
1. SAVE THIS INSTRUCTION for future operation and safety purposes.
2. Try to void use of extension cord unless absolutely necessary.
3. To reduce the risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
4. Do not use charger in damp/wet locations or directly under the sun.
IV. Parts
V. Lithium-ion Battery Charging Mode
DO NOT connect the charger with the adapter before (Lithium) battery polarities are detected
and Ready LED (9) is lit.
(Model No LC-11）
Li-ion Battery tray
1

Advertisement

loading

Summary of Contents for LuminAir LC-11

  • Page 1: User Manual

    Full-time Intelligent Charger (Model No LC-11） User Manual Please read the entire manual before using this product. I. Product features Charge all 3.6V/3.7V Lithium batteries for Cameras, Cell phones, Camcorders, PDAs, iPods by 5V mini USB. Intelligent Polarity Detection. Fast/trickle charge and maintain in full charge.
  • Page 2 1. Remove the Lithium battery from its device, place it in the tray (12) of the charger. 2. Check polarity by adjusting the spring contactors with battery charging connections until the “Ready” LED indicator (9) turns on.  For Batteries with charging connections on the side panel: Adjust the spring contactors pointing horizontally by pressing both sides of “Angle stop releasing knob”...
  • Page 3 5. Some lithium batteries (Sony, JVC, Panasonic, etc…) come with “security charging terminal” marked with letter “C”, DO NOT contact these terminals with spring contactors during charging to avoid irrevocable damage. (Fig. 6.1) Fig. 6.1 Note: To void damaging batteries with “security charging terminal”, DO NOT connect the charger with the adapter before (Lithium) battery polarities are detected and Ready LED (9) is lit.
  • Page 4 IX. Power Transfer Charging Mode 1. Insert a fully charged spare battery into battery tray and secure connections, the yellow “Ready” LED (9) will be lit, then plug in any USB rechargeable hand-held devices into the USB power output port (11). The Charger starts transferring the spare battery as power source via 5V USB to charge any USB devices.