Advertisement
IX. Power Transfer Charging Mode
1. Insert a fully charged spare battery into battery tray and secure
connections, the yellow "Ready" LED (9) will be lit, then plug in any
USB rechargeable hand-held devices into the USB power output
port (11). The Charger starts transferring the spare battery as
power source via 5V USB to charge any USB devices.
2. To avoid over discharge, remove the spare battery as soon as the "Ready" LED (9) is off. Replace
fresh battery to continue charging if necessary.
Note: The Yellow Ready LED (9) will turn off when power transfer via USB is completed (unless the
batteries to be charged might be over-discharged). Please check the charging status on the screen
of the device.
X. Manual Rejuvenating Function
A. If the battery has not been used for a long time or over-discharged (exhausted), the Yellow
"Ready" LED (9) will not turn on even if battery is correctly connected. Place the spring
contactors in contact with the positive (+) and negative (-) of the battery (Fig. B), then, plug
AC adapter into the power input socket (7) until yellow "Ready" LED (9) and Red "Charge"
LED turn on to start charging.
B. If the Yellow "Ready" LED remains off after procedure A, swap the
spring contactors between the positive (+) and negative (-) of the
battery (Fig. C), then plug AC adapter into the power input socket (7)
until yellow "Ready" LED (9) and Red "Charge" LED turn on to start
charging.
Note: If the Yellow "Ready" LED remains off after repeating both A and B procedures for a few
times, this battery might be irrevocable.
XI. CAUTION
This charger is only applicable to 3.6 / 3.7V batteries.
XII. Specifications
Input Voltage:
Output Voltage:
Battery Types:
Cell Phone charge time:
Materials:
Max charging current:
Dimensions:
Weight:
(Fig. B)
AC100～240V / DC 5V
4.25 and USB DC 5V.
3.6 / 3.7V (lithium-ion).
1.5～3 hrs (depending on battery capacity)
Plastic ( ABS、PC、POM)
0.5 A (lithium-ion)
12.3 x 7.5 x 4.5 (Lx W x H) Cm
105g
4
Fig. C
Advertisement
